? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for additional data sheets and product information. m/a - com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 active doubler 7.5 - 22.5/15.0 - 45.0 ghz xx1000 - qt advanced: data sheets contain information regarding a product m/a - com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a - com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v1 features ? +18 dbm output power ? - 20 dbc fundamental leakage ? 3x3 mm qfn package ? 100% rf, dc and output power testing ? rohs* compliant and 260c reflow compatible description m/a - com techs 7.5 - 22.5/15.0 - 45.0 ghz smd active doubler delivers + 18 dbm of output power. the device combines an active doubler with an output buffer amplifier that delivers constant power over a range of input powers. the device has excellent rejection of the fundamental and harmonic products and requires a single positive bias supply. this device uses m/a - com tech's 0.15 gaas phemt device model technology to ensure high reliability and uniformity. the device comes in a low - cost 3x3mm qfn surface mount plastic package offering excellent rf and thermal properties and is rohs compliant. this device is well suited for point - to - point radio, microwave, lmds, satcom and vsat applications. ordering information part number package xx1000 - qt - 0g00 bulk quantity xx1000 - qt - 0g0t tape and reel xx1000 - qt - ev1 evaluation module functional block diagram pin configuration pin no. function pin no. function 3 rf in 13 vd2 5 vg1 15 vd1 6 vss 2,4,9,11 ground 7 vg2 1 1,8,12,14, 16 not connected 10 rf out absolute maximum ratings parameter absolute max. supply voltage (vd) +6.0 vdc supply voltage (vss) - 6.0 vdc supply current (id) 300 ma supply current (iss) 60 ma gate bias voltage (vg) - 0.4 vdc input power (rf pin) +15.0 dbm storage temperature (tstg) - 65 c to +165 c operating temperature (ta) - 5 5 c to mttf table 1 channel temperature (tch) mttf table 1 1. channel temperature directly affects a device's mttf. chan- nel temperature should be kept as low as possible to maximize lifetime. 1. vg2 can be used for current regulating vd2 or vg2 can be set to gnd withvd2 self - biasing at approximately 140ma. t o p v i e w
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for additional data sheets and product information. m/a - com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 active doubler 7.5 - 22.5/15.0 - 45.0 ghz xx1000 - qt advanced: data sheets contain information regarding a product m/a - com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a - com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v1 electrical specifications: 7.5 - 22.5 ghz input frequency (ambient temperature t=25c) parameter units min. typ. max. output frequency range (fout) ghz 15.0 - 45.0 input return loss (s11) db - 15.0 - output return loss (s22) db - 7.0 - saturated output power (psat) dbm - +18 - rf input power (rf pin) dbm - 10.0 - +10.0 fundamental leakage (fin) dbc - 20 - third harmonic leakage (3xfin) dbc - 30 - fourth harmonic leakage (4xfin) dbc - 10 - drain bias voltage (vd1,2) vdc - +5.0 +5.5 gate bias voltage (vg1) vdc - 0.8 - 0.6 - 0.4 gate bias voltage (vg2) vdc - 1.2 0.0 +0.1 supply current (id1,2) (vd=5.0 v, vg1= - 0.6 v, vg2=0.0 v typical) ma - 220 250 source voltage (vss) vdc - 5.5 - 5.0 - 2.0 source current (iss) ma 25 50 60
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for additional data sheets and product information. m/a - com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 active doubler 7.5 - 22.5/15.0 - 45.0 ghz xx1000 - qt advanced: data sheets contain information regarding a product m/a - com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a - com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v1 pcb layout r f i n r f o u t v d 1 v d 2 v g 1 v s s v g 2
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for additional data sheets and product information. m/a - com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 4 active doubler 7.5 - 22.5/15.0 - 45.0 ghz xx1000 - qt advanced: data sheets contain information regarding a product m/a - com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a - com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v1 typical performance curves: nominal bias conditions measured results taken at room temperature in 40 ghz connectorized test fixture with no de - embedding. - 3 0 - 2 0 - 1 0 0 1 0 2 0 3 0 1 5 1 7 1 9 2 1 2 3 2 5 2 7 2 9 3 1 3 3 3 5 3 7 3 9 4 1 4 3 4 5 f i n , p i n = 2 d b m f i n , p i n = 4 d b m f i n , p i n = 6 d b m f i n , p i n = 8 d b m f i n , p i n = 1 0 d b m 2 x f i n , p i n = 2 d b m 2 x f i n , p i n = 4 d b m 2 x f i n , p i n = 6 d b m 2 x f i n , p i n = 8 d b m 2 x f i n , p i n = 1 0 d b m 2 x f i n f i n - 3 0 - 2 5 - 2 0 - 1 5 - 1 0 - 5 0 5 1 0 1 5 2 0 2 5 - 1 5 - 1 0 - 5 0 5 1 0 1 5 p o u t ( f i n x 1 ) , f i n = 1 0 g h z p o u t ( f i n x 2 ) , f i n = 1 0 g h z
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for additional data sheets and product information. m/a - com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 5 active doubler 7.5 - 22.5/15.0 - 45.0 ghz xx1000 - qt advanced: data sheets contain information regarding a product m/a - com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a - com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v1 typical performance curves (cont.) - 3 0 - 2 5 - 2 0 - 1 5 - 1 0 - 5 0 5 1 0 1 5 2 0 1 5 1 7 1 9 2 1 2 3 2 5 2 7 2 9 3 1 3 3 3 5 3 7 3 9 4 1 4 3 4 5 f i n , + 2 5 o c 2 x f i n , + 2 5 o c f i n , - 3 5 o c 2 x f i n , - 3 5 o c f i n , + 7 5 o c 2 x f i n , + 7 5 o c 2 x f i n f i n - 3 0 - 2 5 - 2 0 - 1 5 - 1 0 - 5 0 5 1 0 1 5 2 0 1 5 1 7 1 9 2 1 2 3 2 5 2 7 2 9 3 1 3 3 3 5 3 7 3 9 4 1 4 3 4 5 f i n , + 2 5 o c 2 x f i n , + 2 5 o c f i n , - 3 5 o c 2 x f i n , - 3 5 o c f i n , + 7 5 o c 2 x f i n , + 7 5 o c 2 x f i n f i n
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for additional data sheets and product information. m/a - com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 6 active doubler 7.5 - 22.5/15.0 - 45.0 ghz xx1000 - qt advanced: data sheets contain information regarding a product m/a - com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a - com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v1 typical performance curves (cont.) * m e a s u r e d o n - w a f e r w i t h p r e - p a c k a g i n g . - 3 0 - 2 5 - 2 0 - 1 5 - 1 0 - 5 0 5 1 0 1 5 2 0 5 1 0 1 5 2 0 2 5 3 0 3 5 4 0 4 5 f u n d . ( 5 d b m ) 2 x f i n ( 5 d b m ) 3 x f i n ( 5 d b m ) 4 x f i n ( 5 d b m ) 5 x f i n ( 5 d b m ) 6 x f i n ( 5 d b m ) 7 x f i n ( 5 d b m ) f u n d 2 n d ( r f o u t ) 3 r d 4 t h 5 t h 6 t h 7 t h * m e a s u r e d o n - w a f e r w i t h p r e - p a c k a g i n g . - 3 0 - 2 5 - 2 0 - 1 5 - 1 0 - 5 0 5 1 0 1 5 2 0 5 1 0 1 5 2 0 2 5 3 0 3 5 4 0 4 5 f u n d . ( 0 d b m ) 2 x f i n ( 0 d b m ) 3 x f i n ( 0 d b m ) 4 x f i n ( 0 d b m ) 5 x f i n ( 0 d b m ) 6 x f i n ( 0 d b m ) 7 x f i n ( 0 d b m ) f u n d 2 n d ( r f o u t ) 3 r d 4 t h 5 t h 6 t h 7 t h - 3 0 - 2 5 - 2 0 - 1 5 - 1 0 - 5 0 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0 2 1
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for additional data sheets and product information. m/a - com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 7 active doubler 7.5 - 22.5/15.0 - 45.0 ghz xx1000 - qt advanced: data sheets contain information regarding a product m/a - com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a - com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v1 mttf mttf is calculated from accelerated life - time data of single devices and assumes isothermal back - plate. bias conditions: vd1,2 = 5.0v, id1,2 = 220 ma, vss = - 5.0v, iss = 50 ma 1 . 0 e + 0 0 1 . 0 e + 0 1 1 . 0 e + 0 2 1 . 0 e + 0 3 1 . 0 e + 0 4 1 . 0 e + 0 5 5 5 6 5 7 5 8 5 9 5
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for additional data sheets and product information. m/a - com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 8 active doubler 7.5 - 22.5/15.0 - 45.0 ghz xx1000 - qt advanced: data sheets contain information regarding a product m/a - com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a - com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v1 app note [1] biasing - it is recommended to separately bias each doubler stage with fixed voltages of vd(1,2) =5.0v, vss= - 5.0v and vg1= - 0.6v. the typical dc currents are id1=80ma, id2=140ma and iss=50ma. vg2 can be used for active control biasing of vd2, or it can be set to gnd and vd2 will self bias at approximately 140ma. maximum output power is achieved with vss= - 5.0v and iss=50ma but the device will operate with reduced bias to vss= - 2.0v and iss=25ma. it is also recommended to use active biasing on vd2 with vg2 to keep the currents constant as the rf power and temperature vary; this gives the most reproducible results. depending on the sup- ply voltage available and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with a low value resistor in series with the drain supply used to sense the current. the gate of the phemt is controlled to maintain correct drain current and thus drain voltage. the typical gate voltage for vg2= - 0.1v. typically the gate is protected with silicon diodes to limit the applied voltage. also, make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.43537383 ? china tel: +86.21.2407.1588 visit www.macomtech.com for additional data sheets and product information. m/a - com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 9 active doubler 7.5 - 22.5/15.0 - 45.0 ghz xx1000 - qt advanced: data sheets contain information regarding a product m/a - com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a - com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. rev. v1 handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these class 2 devices. lead - free package dimensions/layout
|
